Race-fit thermal jacket with Windtex Pro Membrane and taped seams for cold and wet conditions.
Detail
The PAS Mechanism Thermal Jacket is suited for cold and wet conditions. The Windtex Pro Membrane used in the 3-layer main fabric adds a high level of stretch and provides an optimal, tight fit for hard-paced training. The DWR treatment and taped seams add an extra layer of protection from the elements. A grid fleece structured backer enhances wicking and insulation, while laser-cut finishing on the hem and sleeves gives a sleek look and minimises chafing. Drainage holes in the rear pockets prevent water from accumulating during the ride.
Made in Lithuania
- Race fit thermal jacket for cold and wet conditions
- 3-layer fabric with Windtex Pro Membrane
- Ultrasonic welded seams taped inside
- High breathability: 7 m²Pa/W (ISO 11092)
- Water resistant: 10,000mm
- YKK Vislon Aquaguard zipper
- Extra added grid fleece in collar lining
- Silicone grip at back panel
- Drainage holes at rear pockets
- Extended cuffs
- Laser-cut hem and sleeve
- PAS branding
- Fabric made in Italy
Key Features
Two-Way YKK Zipper
A YKK Vislon Aquaguard zipper with a durable two-way function keeps you protected from wet weather conditions.
Fabric
A 3-layer fabric with Windtex Pro Membrane and DWR treatment protects from the elements and keeps you warm and dry in wet conditions.
Internally Taped Seams
The jacket comes with internal taped ultrasonic welded seams. These leak-proof seams provide exceptional protection from the weather elements. The seams also give an improved comfort and fit to the jacket.
Drainage Holes
The three rear pockets of the jacket feature a single drainage hole on each pocket to prevent water from accumulating and soaking belongings during the ride.
Raw Edges
A raw laser cut hem and sleeves give an improved level of comfort and provide a sleeker, more minimal look.
Silicone Gripper
The lowest back panel features a striped silicone gripper for improved hold and comfort.
Size & Fit
The jacket has a very tight fit - ideal for high intensity winter rides. We recommend you order one size larger than you would normally do.
Product Specifications
Insulation 6/6
The jacket incorporates both insulation and protection in key areas and provides great insulation properties overall.
Wind Protection is defined as the ability of a product to resist wind from penetrating the fabrics. The jacket merges wind- and water-protection on the chest and arms with the breathability of a traditional jersey on the back and the back of the sleeves.
Water Protection 5/6
Water protection is defined by the products ability to keep you dry. The jacket has a water column pressure of 10.000mm hence offering great water protection. This is almost on par with our Pertex Rain Jacket, and this really tells that this jacket performs well in rainy conditions. Additionally, the jacket has drainage holes in each pocket on the back. It is inevitable that persisting rain may run into your pockets, therefore we have added three drainage holes to get rid of this excess water.
Breathability 4/6
Breathability is defined as the ability of a fabric to allow perspiration. The jacket offers an outstanding balance between warmth and breathability with an exceptional ability to repel water. Breathability: 7 m²Pa/W (ISO 11092)
